SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber for Rhyl, delivered to site

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

Trades and homeowners in Rhyl can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Delivery facts for Rhyl

Delivery
Standard mainland delivery
How it arrives
Bundles with your boards
Nearby (straight line)
Colwyn Bay (10 mi), Flint (16 mi), Heswall (16 mi)
Delivering to
Rhyl, Clwyd
Daylight
About 7h 30m on the shortest day
Postcode districts
LL18, LL22, LL19

Our CLS timber range for Rhyl jobs

  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • Noggins and head platesCut from the same stock.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • FixingsScrews, nails and frame fixings to suit.

Working out quantities for your Rhyl job

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Picking the right product

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Planning the drop in Rhyl

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Rhyl is inside our standard mainland delivery area.

  • Give us the full postcode for the drop point; deliveries around LL18 are priced to the exact address.
  • For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

CLS Studwork Timber in Rhyl: questions

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Do you deliver CLS timber to trades and homeowners in Rhyl?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can I add other materials to my Rhyl delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price