Timber & Sheets
Order CLS timber for delivery in Radcliffe
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
SK Trade is a builders' merchant delivering CLS timber into Radcliffe, priced to your postcode and confirmed in writing.

Your Radcliffe delivery
- Delivering to
- Radcliffe, Greater Manchester
- Daylight
- About 7h 27m on the shortest day
- Postcode districts
- M26, M45, BL9, BL3
- Nearby (straight line)
- Whitefield (1 mi), Prestwich (3 mi), Bury (3 mi)
- How it arrives
- Bundles with your boards
- Delivery
- Standard mainland delivery
Which CLS timber can you order in Radcliffe?
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Noggins and head platesCut from the same stock.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
Sizing your order
A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Before your Radcliffe delivery arrives
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Radcliffe is inside our standard mainland delivery area.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
- In summer Radcliffe gets around 17h 03m of daylight, but early deliveries still beat the traffic and give the longest working day.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
Picking the right product
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
CLS Studwork Timber in Radcliffe: questions
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Can I add other materials to my Radcliffe delivery?
Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
Is there a minimum order for delivery to Radcliffe?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Also delivering CLS timber nearby
- CLS Studwork Timber in Whitefield
- CLS Studwork Timber in Prestwich
- CLS Studwork Timber in Bury
- CLS Studwork Timber in Farnworth
- CLS Studwork Timber in Walkden
- CLS Studwork Timber in Swinton
More materials delivered to Radcliffe
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
