SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber for Pudsey, delivered to site

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

Whether it is a repair, an extension or a new build in Pudsey, we can supply the CLS timber and deliver to site.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Pudsey delivery at a glance

Postcode districts
LS28, LS13, LS12, LS27
How it arrives
Bundles with your boards
Daylight
About 7h 25m on the shortest day
Delivery
Standard mainland delivery
Delivering to
Pudsey, West Yorkshire
Nearby (straight line)
Bradford (4 mi), Morley (5 mi), Leeds (5 mi)

Which CLS timber can you order in Pudsey?

  • FixingsScrews, nails and frame fixings to suit.
  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • Noggins and head platesCut from the same stock.

Quantities: a worked example

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivering CLS timber in Pudsey

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Pudsey is inside our standard mainland delivery area.

  • With roughly 7h 25m of daylight in Pudsey around the shortest day, morning deliveries leave more working light for the job.
  • Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
  • If the site is up a shared drive or behind other houses, tell us the distance from the road.

Choosing CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Ordering CLS timber for Pudsey: FAQs

Is there a minimum order for delivery to Pudsey?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Can you deliver CLS timber to a site with restricted access in Pudsey?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price