CLS Studwork Timber delivered to Oadby

CLS Studwork Timber available for Oadby delivery

• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• FixingsScrews, nails and frame fixings to suit.
• Noggins and head platesCut from the same stock.

How much will you need?

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Planning the drop in Oadby

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Oadby is inside our standard mainland delivery area.

• If neighbours share the access, it helps to let them know a lorry is coming.
• On busy streets in Oadby, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Picking the right product

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Ordering CLS timber for Oadby: FAQs

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Can you deliver CLS timber to a site with restricted access in Oadby?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How soon can CLS timber be delivered in Oadby?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.