Timber & Sheets
CLS Studwork Timber delivered to Newton Abbot
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Whether it is a repair, an extension or a new build in Newton Abbot, we can supply the CLS timber and deliver to site.
Your Newton Abbot delivery
- Delivery
- Standard mainland delivery
- Daylight
- About 7h 59m on the shortest day
- Nearby (straight line)
- Torquay (6 mi), Paignton (7 mi), Exmouth (11 mi)
- How it arrives
- Bundles with your boards
- Postcode districts
- TQ12
- Delivering to
- Newton Abbot, Devon
What CLS timber can we deliver to Newton Abbot?
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Noggins and head platesCut from the same stock.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- FixingsScrews, nails and frame fixings to suit.
Before your Newton Abbot delivery arrives
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Newton Abbot is inside our standard mainland delivery area.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
- Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
- With roughly 7h 59m of daylight in Newton Abbot around the shortest day, morning deliveries leave more working light for the job.
Getting the right CLS timber
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Estimating your CLS timber
A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
CLS Studwork Timber in Newton Abbot: questions
Can you deliver CLS timber to a site with restricted access in Newton Abbot?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Do you deliver CLS timber to trades and homeowners in Newton Abbot?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
CLS Studwork Timber in neighbouring towns
- CLS Studwork Timber in Torquay
- CLS Studwork Timber in Paignton
- CLS Studwork Timber in Exmouth
- CLS Studwork Timber in Exeter
- CLS Studwork Timber in Plymouth
- CLS Studwork Timber in Tiverton
Also available in Newton Abbot
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.