CLS Studwork Timber for Newport (Gwent), delivered to site

Choosing from our CLS timber range

• FixingsScrews, nails and frame fixings to suit.
• Noggins and head platesCut from the same stock.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.

A quick quantity check

A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivery to Newport (Gwent): what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Newport (Gwent) is inside our standard mainland delivery area.

• In summer Newport (Gwent) gets around 16h 39m of daylight, but early deliveries still beat the traffic and give the longest working day.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• On busy streets in Newport (Gwent), a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Before you order CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Your questions answered

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Is there a minimum order for delivery to Newport (Gwent)?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can I add other materials to my Newport (Gwent) delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.