CLS Studwork Timber for Lisnaskea, delivered to site

CLS Studwork Timber we supply in Lisnaskea

• FixingsScrews, nails and frame fixings to suit.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Noggins and head platesCut from the same stock.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

How delivery works in Lisnaskea

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Deliveries to Northern Ireland include a sea crossing, so we quote each order individually.

• In summer Lisnaskea gets around 17h 12m of daylight, but early deliveries still beat the traffic and give the longest working day.
• If neighbours share the access, it helps to let them know a lorry is coming.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

CLS Studwork Timber: choosing well

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

How much will you need?

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

CLS Studwork Timber in Lisnaskea: questions

Is there a minimum order for delivery to Lisnaskea?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver CLS timber to a site with restricted access in Lisnaskea?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.