Timber & Sheets
Order CLS timber for delivery in Kidderminster
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
From DY10 to DY11, we price CLS timber delivered to Kidderminster and confirm the drop point and date when you order.
Your Kidderminster delivery
- Delivery
- Standard mainland delivery
- Delivering to
- Kidderminster, Worcestershire
- How it arrives
- Bundles with your boards
- Daylight
- About 7h 40m on the shortest day
- Postcode districts
- DY10, DY11
- Nearby (straight line)
- Stourport-on-Severn (4 mi), Stourbridge (7 mi), Kingswinford (8 mi)
CLS Studwork Timber we supply in Kidderminster
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
Before you order CLS timber
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Estimating your CLS timber
A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Before your Kidderminster delivery arrives
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Kidderminster is inside our standard mainland delivery area.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
Your questions answered
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Can you deliver CLS timber to a site with restricted access in Kidderminster?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Can I add other materials to my Kidderminster delivery?
Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
CLS Studwork Timber near Kidderminster
- CLS Studwork Timber in Stourport-on-Severn
- CLS Studwork Timber in Stourbridge
- CLS Studwork Timber in Kingswinford
- CLS Studwork Timber in Brierley Hill
- CLS Studwork Timber in Bromsgrove
- CLS Studwork Timber in Droitwich
Complete your Kidderminster order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.