SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber delivered to Hounslow

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

Trades and homeowners in Hounslow can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

CLS Studwork Timber to Hounslow: the basics

Delivery
Standard mainland delivery
Daylight
About 7h 50m on the shortest day
Delivering to
Hounslow, Greater London
Postcode districts
TW3, TW4, TW7, TW5
Nearby (straight line)
Isleworth (1 mi), Heston (1 mi), Richmond (2 mi)
How it arrives
Bundles with your boards

Choosing from our CLS timber range

  • FixingsScrews, nails and frame fixings to suit.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • Noggins and head platesCut from the same stock.

How delivery works in Hounslow

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Hounslow is inside our standard mainland delivery area.

  • If the site is up a shared drive or behind other houses, tell us the distance from the road.
  • Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
  • On busy streets in Hounslow, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Estimating your CLS timber

A 3 m partition 2.4 m high at 400 mm centres takes 9 CLS studs, 6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Things to check before you order

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Your questions answered

Can you deliver CLS timber to a site with restricted access in Hounslow?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Can I add other materials to my Hounslow delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price