SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber delivered to Haverhill

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

We deliver CLS timber to sites, driveways and yards across Haverhill, from a single pallet for a small job to full loads for bigger builds.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

CLS Studwork Timber to Haverhill: the basics

Postcode districts
CB9, CO10
Delivery
Standard mainland delivery
Nearby (straight line)
Newmarket (11 mi), Sudbury (13 mi), Braintree (15 mi)
Delivering to
Haverhill, Suffolk
How it arrives
Bundles with your boards
Daylight
About 7h 44m on the shortest day

Choosing from our CLS timber range

  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • Noggins and head platesCut from the same stock.
  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • FixingsScrews, nails and frame fixings to suit.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

Choosing CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Delivery to Haverhill: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Haverhill is inside our standard mainland delivery area.

  • If neighbours share the access, it helps to let them know a lorry is coming.
  • For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
  • Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Sizing your order

A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Ordering CLS timber for Haverhill: FAQs

Can I add other materials to my Haverhill delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Can you deliver CLS timber to a site with restricted access in Haverhill?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price