Timber & Sheets
Order CLS timber for delivery in Egham
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Trades and homeowners in Egham can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.

Your Egham delivery
- Daylight
- About 7h 50m on the shortest day
- How it arrives
- Bundles with your boards
- Postcode districts
- TW20, TW18, GU25, TW19
- Delivering to
- Egham, Surrey
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Staines (2 mi), Ashford (Surrey) (4 mi), Windsor (4 mi)
CLS Studwork Timber we supply in Egham
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Noggins and head platesCut from the same stock.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- FixingsScrews, nails and frame fixings to suit.
CLS Studwork Timber: choosing well
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Quantities: a worked example
A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Delivery to Egham: what helps
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Egham is inside our standard mainland delivery area.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
Your questions answered
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Do you deliver CLS timber to Egham?
Yes. We deliver across Egham, including TW20, TW18, GU25, TW19. Egham is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Can you deliver CLS timber to a site with restricted access in Egham?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
CLS Studwork Timber near Egham
- CLS Studwork Timber in Staines
- CLS Studwork Timber in Ashford (Surrey)
- CLS Studwork Timber in Windsor
- CLS Studwork Timber in Slough
- CLS Studwork Timber in Feltham
- CLS Studwork Timber in Sunbury-on-Thames
More materials delivered to Egham
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
