Order CLS timber for delivery in Deeside

Which CLS timber can you order in Deeside?

• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Noggins and head platesCut from the same stock.

Getting the right CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Working out quantities for your Deeside job

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Before your Deeside delivery arrives

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Deeside is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• In summer Deeside gets around 16h 58m of daylight, but early deliveries still beat the traffic and give the longest working day.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Questions about CLS timber delivery in Deeside

Can I add other materials to my Deeside delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver CLS timber to a site with restricted access in Deeside?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.