CLS Studwork Timber delivered to Clacton-on-Sea

Our CLS timber range for Clacton-on-Sea jobs

• FixingsScrews, nails and frame fixings to suit.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

Getting the right CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Before your Clacton-on-Sea delivery arrives

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Clacton-on-Sea is inside our standard mainland delivery area.

• On busy streets in Clacton-on-Sea, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.

A quick quantity check

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Questions about CLS timber delivery in Clacton-on-Sea

Do you deliver CLS timber to Clacton-on-Sea?

Yes. We deliver across Clacton-on-Sea, including CO15, CO16, CO13. Clacton-on-Sea is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is there a minimum order for delivery to Clacton-on-Sea?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.