Timber & Sheets
CLS Studwork Timber delivered to Christchurch
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
We deliver CLS timber to sites, driveways and yards across Christchurch, from a single pallet for a small job to full loads for bigger builds.
Your Christchurch delivery
- Nearby (straight line)
- Bournemouth (4 mi), New Milton (5 mi), Poole (9 mi)
- Delivery
- Standard mainland delivery
- Delivering to
- Christchurch, Dorset
- Postcode districts
- BH23, BH6, BH7
- Daylight
- About 7h 57m on the shortest day
- How it arrives
- Bundles with your boards
What CLS timber can we deliver to Christchurch?
- Noggins and head platesCut from the same stock.
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
Delivering CLS timber in Christchurch
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Christchurch is inside our standard mainland delivery area.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
Estimating your CLS timber
A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Getting the right CLS timber
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Ordering CLS timber for Christchurch: FAQs
Do you deliver CLS timber to trades and homeowners in Christchurch?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Do you deliver CLS timber to Christchurch?
Yes. We deliver across Christchurch, including BH23, BH6, BH7. Christchurch is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Nearby towns we deliver CLS timber to
- CLS Studwork Timber in Bournemouth
- CLS Studwork Timber in New Milton
- CLS Studwork Timber in Poole
- CLS Studwork Timber in Totton
- CLS Studwork Timber in Hythe
- CLS Studwork Timber in Southampton
More materials delivered to Christchurch
- Bagged Concrete & Mortar Mixes in Christchurch
- Mineral Wool Insulation in Christchurch
- Joist Hangers & Timber Connectors in Christchurch
- Damp Proofing & Membranes in Christchurch
- Bricks in Christchurch
- Metal Stud & Ceiling Systems in Christchurch
- Underground Drainage in Christchurch
- Plasterboard in Christchurch
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.