SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber for Chatham, delivered to site

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

Trades and homeowners in Chatham can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

CLS Studwork Timber to Chatham: the basics

Delivering to
Chatham, Kent
How it arrives
Bundles with your boards
Daylight
About 7h 51m on the shortest day
Postcode districts
ME4, ME5, ME1, ME7
Delivery
Standard mainland delivery
Nearby (straight line)
Rochester (1 mi), Gillingham (1 mi), Strood (2 mi)

CLS Studwork Timber available for Chatham delivery

  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • Noggins and head platesCut from the same stock.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

How delivery works in Chatham

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Chatham is inside our standard mainland delivery area.

  • Give us the full postcode for the drop point; deliveries around ME4 are priced to the exact address.
  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
  • With roughly 7h 51m of daylight in Chatham around the shortest day, morning deliveries leave more working light for the job.

Choosing CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Estimating your CLS timber

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

CLS Studwork Timber in Chatham: questions

Can you deliver CLS timber to a site with restricted access in Chatham?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Can I add other materials to my Chatham delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price