Timber & Sheets
CLS Studwork Timber delivered to Belper
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
SK Trade is a builders' merchant delivering CLS timber into Belper, priced to your postcode and confirmed in writing.
CLS Studwork Timber to Belper: the basics
- Delivering to
- Belper, Derbyshire
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Ripley (3 mi), Heanor (5 mi), Alfreton (7 mi)
- Postcode districts
- DE56, DE21, DE5
- How it arrives
- Bundles with your boards
- Daylight
- About 7h 33m on the shortest day
CLS Studwork Timber we supply in Belper
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Noggins and head platesCut from the same stock.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- FixingsScrews, nails and frame fixings to suit.
Working out quantities for your Belper job
A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Choosing CLS timber
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Getting CLS timber onto your Belper site
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Belper is inside our standard mainland delivery area.
- With roughly 7h 33m of daylight in Belper around the shortest day, morning deliveries leave more working light for the job.
- Give us the full postcode for the drop point; deliveries around DE56 are priced to the exact address.
- Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
CLS Studwork Timber in Belper: questions
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Do you deliver CLS timber to trades and homeowners in Belper?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
What does CLS stand for?
Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.
Is there a minimum order for delivery to Belper?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Other towns near Belper
- CLS Studwork Timber in Ripley
- CLS Studwork Timber in Heanor
- CLS Studwork Timber in Alfreton
- CLS Studwork Timber in Derby
- CLS Studwork Timber in Ilkeston
- CLS Studwork Timber in Kirkby-in-Ashfield
More materials delivered to Belper
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.