CLS Studwork Timber delivery in County Armagh

CLS Studwork Timber available for County Armagh delivery

• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Noggins and head platesCut from the same stock.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.

CLS Studwork Timber delivered in County Armagh towns

• CLS Studwork Timber in Craigavon
• CLS Studwork Timber in Portadown
• CLS Studwork Timber in Newry
• CLS Studwork Timber in Armagh

Sizing your order

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivery to County Armagh: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Deliveries to Northern Ireland include a sea crossing, so we quote each order individually.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Give us the full postcode for the drop point; deliveries around BT are priced to the exact address.

Getting the right CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Common questions from County Armagh

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Do you deliver CLS timber to trades and homeowners in County Armagh?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Is there a minimum order for delivery to County Armagh?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.