Timber & Sheets
Treated Carcassing Timber delivery in Wellington
Carcassing timber is strength-graded, sawn softwood used for the structural frame of a building, such as floor joists, rafters, ceiling joists and stud walls.
Building in Wellington? Send us your list and we will come back with a delivered price for the carcassing timber and anything else on it.

Treated Carcassing Timber to Wellington: the basics
- Delivering to
- Wellington, Shropshire
- Daylight
- About 7h 37m on the shortest day
- Delivery
- Standard mainland delivery
- How it arrives
- Banded packs, long-length access
- Nearby (straight line)
- Telford (3 mi), Shrewsbury (10 mi), Stafford (18 mi)
- Postcode districts
- TF1, TF6, TF5, TF4
Treated Carcassing Timber available for Wellington delivery
- C16 graded carcassingThe everyday structural grade for joists, rafters and studs.
- C24 graded carcassingStronger grade for longer spans or smaller sections.
- Wall plate and nogginsSmaller sections for plates, noggins and bracing.
- Treated timberPressure treated for protection against rot and insect attack.
- Longer lengthsLengths beyond the common range to order.
Planning the drop in Wellington
Timber is delivered in packs or bundles on a flatbed; long lengths need clear access along the drop point. Wellington is inside our standard mainland delivery area.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
- Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
Getting the right carcassing timber
Which treatment?
Treatment is specified by use class. Timber inside a building is usually use class 1 or 2; external timber out of ground contact is use class 3; timber in ground contact needs use class 4.
Cut ends
Treat any cut ends with a suitable end-grain preservative, especially on external work.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
How much will you need?
A floor 4.8 m wide with joists spanning 4.2 m at 400 mm centres needs 13 joists, plus trimmers and noggins. The section and grade, such as 47 × 200 mm C24, come from span tables or your engineer; send us the timber schedule and we will price it.
Questions about carcassing timber delivery in Wellington
Can you cut timber to length?
Ask when you request a price; we will tell you what cutting is possible for your order.
Is there a minimum order for delivery to Wellington?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Is your carcassing timber treated?
We supply treated carcassing as standard for structural work. Tell us if the timber is for external or ground-contact use so we supply the right treatment level.
Can you deliver carcassing timber to a site with restricted access in Wellington?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Other towns near Wellington
- Treated Carcassing Timber in Telford
- Treated Carcassing Timber in Shrewsbury
- Treated Carcassing Timber in Stafford
- Treated Carcassing Timber in Wolverhampton
- Treated Carcassing Timber in Wednesfield
- Treated Carcassing Timber in Kingswinford
Complete your Wellington order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
