Bricks delivery in Wellington

Which bricks can you order in Wellington?

• Engineering bricks, Class A and BDense, low-absorption bricks for below DPC, inspection chambers and retaining walls.
• Concrete bricksConsistent concrete units in standard and coloured finishes, useful for below-ground work.
• Brick matchingSend a photo or sample and we will look for the closest match in manufacturers' current ranges.
• Perforated and frogged bricksHoles or a frog reduce weight and help the mortar key.
• Common bricksPlain bricks for internal or hidden walls where looks do not matter.

A quick quantity check

Take a garden wall in Wellington 9 m long and 1.8 m high: 16.2 m². At 60 bricks per square metre plus 5% for cuts that is 1,021 bricks, roughly 3 packs of 500 depending on the maker, laid in about 0.96 tonnes of building sand and 9 bags of cement at a 1:4 mix. Try the brick calculator

Getting bricks onto your Wellington site

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. Wellington is inside our standard mainland delivery area.

• If neighbours share the access, it helps to let them know a lorry is coming.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Give us the full postcode for the drop point; deliveries around TF1 are priced to the exact address.

Picking the right product

Colour consistency

Order everything for one job at the same time so the bricks come from the same production run, then mix from three or four packs as you lay to blend any variation.

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or building control may specify one.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

Can you match my existing bricks?

Often, yes. Send the brick name if you have it, or a daylight photo of a clean face with a tape measure for scale. We will look for the nearest match in current ranges and can usually arrange a sample before you commit to a full order.

How much mortar do 1,000 bricks need?

Roughly half a cubic metre of mixed mortar, which is about 1 tonne of building sand and 8 to 9 bags of cement at a 1:4 mix. Our brick calculator works it out for your wall.

Can you deliver bricks to a site with restricted access in Wellington?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can I add other materials to my Wellington delivery?

Yes. Put everything on one list, from bricks to fixings and PPE, and we will price it as one delivery where the products can travel together.