Timber & Sheets
Treated Carcassing Timber for Carlisle, delivered to site
Carcassing timber is strength-graded, sawn softwood used for the structural frame of a building, such as floor joists, rafters, ceiling joists and stud walls.
Trades and homeowners in Carlisle can order carcassing timber for delivery by sending a list, a drawing or just the sizes of the job.

Treated Carcassing Timber to Carlisle: the basics
- Delivering to
- Carlisle, Cumbria
- Delivery
- Standard mainland delivery
- Daylight
- About 7h 11m on the shortest day
- How it arrives
- Banded packs, long-length access
- Postcode districts
- CA1, CA3, CA2, CA4
- Nearby (straight line)
- Annan (14 mi), Dumfries (29 mi), Locharbriggs (29 mi)
Choosing from our carcassing timber range
- Wall plate and nogginsSmaller sections for plates, noggins and bracing.
- C24 graded carcassingStronger grade for longer spans or smaller sections.
- Treated timberPressure treated for protection against rot and insect attack.
- Fencing and sleeper timberTreated posts, rails and sleepers on request.
- C16 graded carcassingThe everyday structural grade for joists, rafters and studs.
Delivery to Carlisle: what helps
Timber is delivered in packs or bundles on a flatbed; long lengths need clear access along the drop point. Carlisle is inside our standard mainland delivery area.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
Treated Carcassing Timber: choosing well
C16 or C24?
C24 is stronger and stiffer, so it can span further or use a smaller section. Span tables and your structural drawings decide which grade and size you need.
Which treatment?
Treatment is specified by use class. Timber inside a building is usually use class 1 or 2; external timber out of ground contact is use class 3; timber in ground contact needs use class 4.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Quantities: a worked example
A floor 6 m wide with joists spanning 3 m at 400 mm centres needs 16 joists, plus trimmers and noggins. The section and grade, such as 47 × 200 mm C24, come from span tables or your engineer; send us the timber schedule and we will price it.
Treated Carcassing Timber in Carlisle: questions
Is there a minimum order for delivery to Carlisle?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Can you cut timber to length?
Ask when you request a price; we will tell you what cutting is possible for your order.
Can I add other materials to my Carlisle delivery?
Yes. Put everything on one list, from carcassing timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
What does C16 and C24 mean?
They are strength classes under BS EN 338. C24 timber is stronger and stiffer than C16, which lets it span further for the same size.
Other towns near Carlisle
- Treated Carcassing Timber in Annan
- Treated Carcassing Timber in Dumfries
- Treated Carcassing Timber in Locharbriggs
- Treated Carcassing Timber in Workington
- Treated Carcassing Timber in Whitehaven
- Treated Carcassing Timber in Hawick
Add to your Carlisle delivery
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
