Building & Sharp Sand for Warrington, delivered to site

Which sand can you order in Warrington?

• Plastering sandWashed sand for render and sand-and-cement plaster.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Small bagsFor small jobs and tight access.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.

How delivery works in Warrington

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Warrington is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.

How much will you need?

A 25 m² floor screed at 65 mm is 1.62 m³: about 2.6 tonnes of sharp sand at a 1:4 mix, or 4 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Picking the right product

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Questions about sand delivery in Warrington

Can bulk bags go on my drive?

Yes, if the crane can reach and the drive can take the weight. Tell us about any block paving or soft ground.

Do you deliver sand to trades and homeowners in Warrington?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can you deliver sand to a site with restricted access in Warrington?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.