Building & Sharp Sand delivery in Golborne

Our sand range for Golborne jobs

• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.

Things to check before you order

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Quantities: a worked example

An 18 m² floor screed at 65 mm is 1.17 m³: about 1.87 tonnes of sharp sand at a 1:4 mix, or 3 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Delivery to Golborne: what helps

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Golborne is inside our standard mainland delivery area.

• Give us the full postcode for the drop point; deliveries around WA3 are priced to the exact address.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Building & Sharp Sand questions

Is there a minimum order for delivery to Golborne?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much sand per 1,000 bricks?

Roughly 1 tonne of soft building sand at a 1:4 mortar mix.

Do you deliver sand to Golborne?

Yes. We deliver across Golborne, including WA3, WN2, WN4. Golborne is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.