Cement & Aggregates
Order sand for delivery in Romford
Building sand (soft sand) is a fine sand for bricklaying mortar, while sharp sand is coarser and is used for concrete, screeds and paving beds.
Need sand on site in Romford? Tell us what you are building and we will work out the quantities and price it delivered.

Romford delivery at a glance
- Delivery
- Standard mainland delivery
- How it arrives
- Bulk bags, usually crane-lifted
- Nearby (straight line)
- Hornchurch (2 mi), Ilford (5 mi), Barking (5 mi)
- Daylight
- About 7h 49m on the shortest day
- Postcode districts
- RM1, RM2, RM7, RM12
- Delivering to
- Romford, Greater London
Building & Sharp Sand we supply in Romford
- Plastering sandWashed sand for render and sand-and-cement plaster.
- Small bagsFor small jobs and tight access.
- Soft building sandFine sand that gives smooth, workable bricklaying mortar.
- Sharp sandCoarser grit sand for screeds, concrete and laying paving.
- Kiln-dried sandFine dry sand for brushing into block-paving joints.
Picking the right product
Soft or sharp?
Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.
Covering bulk bags
Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.
Estimating your sand
A 12 m² floor screed at 65 mm is 0.78 m³: about 1.25 tonnes of sharp sand at a 1:4 mix, or 2 bulk bags at around 850 kg each, plus the cement. Try the sand calculator
Delivering sand in Romford
Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Romford is inside our standard mainland delivery area.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
Common questions from Romford
What is the difference between building sand and sharp sand?
Building (soft) sand is fine and makes smooth mortar for laying bricks. Sharp sand is coarser, drains better and is used in concrete, screeds and paving beds.
How much sand do I need for a screed?
Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.
Can I add other materials to my Romford delivery?
Yes. Put everything on one list, from sand to fixings and PPE, and we will price it as one delivery where the products can travel together.
Do you deliver sand to Romford?
Yes. We deliver across Romford, including RM1, RM2, RM7, RM12. Romford is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Building & Sharp Sand near Romford
- Building & Sharp Sand in Hornchurch
- Building & Sharp Sand in Ilford
- Building & Sharp Sand in Barking
- Building & Sharp Sand in Thamesmead
- Building & Sharp Sand in Brentwood
- Building & Sharp Sand in South Ockendon
Other materials for Romford sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
