Building & Sharp Sand delivered to Ripley

Choosing from our sand range

• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.
• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Small bagsFor small jobs and tight access.

Delivery to Ripley: what helps

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Ripley is inside our standard mainland delivery area.

• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.

Estimating your sand

An 18 m² floor screed at 65 mm is 1.17 m³: about 1.87 tonnes of sharp sand at a 1:4 mix, or 3 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Building & Sharp Sand: choosing well

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Ordering sand for Ripley: FAQs

Can you deliver sand to a site with restricted access in Ripley?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver sand to trades and homeowners in Ripley?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can bulk bags go on my drive?

Yes, if the crane can reach and the drive can take the weight. Tell us about any block paving or soft ground.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.