Order PIR insulation boards for delivery in Redcar

Choosing from our PIR insulation boards range

• Flat roof boardsBoards for warm flat roof build-ups.
• Thermal laminate boardsPIR bonded to plasterboard.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Foil tape and fixingsTo seal joints and fix boards.

How much will you need?

Insulating 45 m² of rafters, floor or wall takes 17 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Delivery to Redcar: what helps

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Redcar is inside our standard mainland delivery area.

• If neighbours share the access, it helps to let them know a lorry is coming.
• In summer Redcar gets around 17h 17m of daylight, but early deliveries still beat the traffic and give the longest working day.
• On busy streets in Redcar, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Choosing PIR insulation boards

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Redcar

Can you deliver PIR insulation boards to a site with restricted access in Redcar?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

How soon can PIR insulation boards be delivered in Redcar?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.