Building & Sharp Sand delivery in Newton Abbot

What sand can we deliver to Newton Abbot?

• Sharp sandCoarser grit sand for screeds, concrete and laying paving.
• Small bagsFor small jobs and tight access.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Plastering sandWashed sand for render and sand-and-cement plaster.

Building & Sharp Sand: choosing well

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

A quick quantity check

An 18 m² floor screed at 65 mm is 1.17 m³: about 1.87 tonnes of sharp sand at a 1:4 mix, or 3 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Planning the drop in Newton Abbot

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Newton Abbot is inside our standard mainland delivery area.

• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Common questions from Newton Abbot

Can I add other materials to my Newton Abbot delivery?

Yes. Put everything on one list, from sand to fixings and PPE, and we will price it as one delivery where the products can travel together.

How much does a bulk bag of sand weigh?

Around 850 kg is typical, but bag weights vary between suppliers. We confirm the weight with your price.

Can you deliver sand to a site with restricted access in Newton Abbot?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.