Cement & Aggregates
Building & Sharp Sand delivery in Milford Haven
Building sand (soft sand) is a fine sand for bricklaying mortar, while sharp sand is coarser and is used for concrete, screeds and paving beds.
We deliver sand to sites, driveways and yards across Milford Haven, from a single pallet for a small job to full loads for bigger builds.

Delivery facts for Milford Haven
- Nearby (straight line)
- Haverfordwest (7 mi), Carmarthen (33 mi), Llanelli (37 mi)
- Daylight
- About 7h 47m on the shortest day
- Delivery
- Standard mainland delivery
- Delivering to
- Milford Haven, Dyfed
- Postcode districts
- SA73, SA71, SA62
- How it arrives
- Bulk bags, usually crane-lifted
What sand can we deliver to Milford Haven?
- Plastering sandWashed sand for render and sand-and-cement plaster.
- Sharp sandCoarser grit sand for screeds, concrete and laying paving.
- Kiln-dried sandFine dry sand for brushing into block-paving joints.
- Small bagsFor small jobs and tight access.
Choosing sand
Colour of mortar
Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.
Covering bulk bags
Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.
Delivering sand in Milford Haven
Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Milford Haven is inside our standard mainland delivery area.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
Sizing your order
A 30 m² floor screed at 65 mm is 1.95 m³: about 3.12 tonnes of sharp sand at a 1:4 mix, or 4 bulk bags at around 850 kg each, plus the cement. Try the sand calculator
Common questions from Milford Haven
How much does a bulk bag of sand weigh?
Around 850 kg is typical, but bag weights vary between suppliers. We confirm the weight with your price.
Do you deliver sand to trades and homeowners in Milford Haven?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Is there a minimum order for delivery to Milford Haven?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
How much sand do I need for a screed?
Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.
Close to Milford Haven
- Building & Sharp Sand in Haverfordwest
- Building & Sharp Sand in Carmarthen
- Building & Sharp Sand in Llanelli
- Building & Sharp Sand in Gorseinon
- Building & Sharp Sand in Ammanford
- Building & Sharp Sand in Swansea
More from SK Trade in Milford Haven
- Steel & Concrete Lintels in Milford Haven
- Adhesives, Sealants & Foam in Milford Haven
- Tools & Site Safety in Milford Haven
- PIR Insulation Boards in Milford Haven
- Joist Hangers & Timber Connectors in Milford Haven
- MOT Type 1 Sub-base in Milford Haven
- Mineral Wool Insulation in Milford Haven
- Damp Proofing & Membranes in Milford Haven
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
