Building & Sharp Sand for Kirkcaldy, delivered to site

Our sand range for Kirkcaldy jobs

• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Small bagsFor small jobs and tight access.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.
• Kiln-dried sandFine dry sand for brushing into block-paving joints.

Estimating your sand

A 10 m² floor screed at 65 mm is 0.65 m³: about 1.04 tonnes of sharp sand at a 1:4 mix, or 2 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Getting sand onto your Kirkcaldy site

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Kirkcaldy is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Give us the full postcode for the drop point; deliveries around KY1 are priced to the exact address.

Picking the right product

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

Building & Sharp Sand in Kirkcaldy: questions

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.

Do you deliver sand to trades and homeowners in Kirkcaldy?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Do you deliver sand to Kirkcaldy?

Yes. We deliver across Kirkcaldy, including KY1, KY2, KY3. Kirkcaldy is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How much sand per 1,000 bricks?

Roughly 1 tonne of soft building sand at a 1:4 mortar mix.