Order sand for delivery in Goole

Our sand range for Goole jobs

• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Plastering sandWashed sand for render and sand-and-cement plaster.

How much will you need?

A 15 m² floor screed at 65 mm is 0.98 m³: about 1.56 tonnes of sharp sand at a 1:4 mix, or 2 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Getting sand onto your Goole site

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Goole is inside our standard mainland delivery area.

• In summer Goole gets around 17h 05m of daylight, but early deliveries still beat the traffic and give the longest working day.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Picking the right product

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Building & Sharp Sand questions

Is there a minimum order for delivery to Goole?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you deliver sand to Goole?

Yes. We deliver across Goole, including DN14. Goole is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Can bulk bags go on my drive?

Yes, if the crane can reach and the drive can take the weight. Tell us about any block paving or soft ground.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.