Ballast & Gravel delivery in Stoke-on-Trent

Which ballast and gravel can you order in Stoke-on-Trent?

• ShingleFor drainage layers and backfill.
• Bulk bags and small bagsTo suit quantity and access.
• 10 mm and 20 mm gravelClean graded gravel for concrete, drainage and paths.
• All-in ballast20 mm down sand and gravel mix for concrete.
• Decorative gravel and chippingsColours and sizes for paths and gardens.

A quick quantity check

A base 4 × 3 m and 100 mm deep is 1.2 m³ of concrete. At 1:5 with 5% extra that is about 2.75 tonnes of all-in ballast and 19 bags of cement. Try the concrete calculator

Ballast & Gravel: choosing well

Gravel size

20 mm gravel suits concrete and drainage layers; 10 mm and pea gravel suit bedding pipes and paths.

Ballast or separate sand and gravel?

All-in ballast is convenient for general concrete. For more control over the mix, use separate sharp sand and gravel.

Getting ballast and gravel onto your Stoke-on-Trent site

Bulk bags are usually lifted off by crane where access allows; tell us where they can sit and whether the ground is firm. Stoke-on-Trent is inside our standard mainland delivery area.

• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Ordering ballast and gravel for Stoke-on-Trent: FAQs

How much ballast for a cubic metre of concrete?

Roughly 2 to 2.2 tonnes of all-in ballast with about 15 bags of cement at a 1:5 mix. Our concrete calculator works out your slab or footing.

Is there a minimum order for delivery to Stoke-on-Trent?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you deliver ballast and gravel to trades and homeowners in Stoke-on-Trent?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How much gravel do I need for a path?

Multiply the area by the depth (often 40 to 50 mm for decorative gravel) to get cubic metres, then allow about 1.5 tonnes per cubic metre.