Order anchors and bolts for delivery in Harrogate

Which anchors and bolts can you order in Harrogate?

• Frame fixings and plugsFor lighter fixings into masonry.
• Concrete screwsFast, removable fixings straight into masonry.
• Coach bolts and coach screwsFor timber to timber and timber to masonry fixings.
• Threaded rod, nuts and washersIn common diameters and grades.

Working out quantities for your Harrogate job

As an illustration only: anchors at 600 mm centres along a 2.4 m ledger means 5 fixings. Structural fixings must follow your design, so send us the specified anchor and spacing and we will price it.

Planning the drop in Harrogate

Boxed with the rest of your order. Harrogate is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Getting the right anchors and bolts

Structural fixings

For anything structural or safety-critical, such as a ledger carrying a floor or a balustrade, use anchors with a technical assessment and follow the design.

Edge distances

Every anchor has minimum edge distances and spacings; fixing too close to an edge can crack the masonry.

Questions about anchors and bolts delivery in Harrogate

What is a European Technical Assessment?

An independent assessment of an anchor's performance, which designers use to specify fixings for structural loads.

Is there a minimum order for delivery to Harrogate?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can I add other materials to my Harrogate delivery?

Yes. Put everything on one list, from anchors and bolts to fixings and PPE, and we will price it as one delivery where the products can travel together.

How long does resin take to cure?

It depends on the product and temperature, from minutes to hours. The cartridge gives cure times.