Plywood delivered across Perth and Kinross

Choosing from our plywood range

• Structural softwood plywoodGraded for roof decks, floors and sheathing.
• Exterior plywoodBonded for humid and exterior conditions.
• Marine plywoodHigh-grade ply for very demanding conditions.
• Hardwood-faced plywoodSmoother faces for joinery and fit-out.
• Phenolic-faced plyHard-wearing film-faced sheets for floors and formwork.

Plywood delivered in Perth and Kinross towns

• Plywood in Perth
• Plywood in Blairgowrie
• Plywood in Crieff
• Plywood in Auchterarder
• Plywood in Scone

A quick quantity check

Decking 36 m² with 2440 × 1220 mm sheets takes 14 sheets including 10% for cutting.

Delivery to Perth and Kinross: what helps

Sheets travel flat on the lorry bed and are hand-offloaded or crane-lifted in packs. Our standard mainland delivery area covers Perth and Kinross.

• On busy streets in Perth and Kinross, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Getting the right plywood

Structural use

Roof decks and floors need plywood marked for structural use. Check the thickness against the joist spacing.

Thickness for floors

18 mm or more is common for floors on joists at 400 mm centres; follow your design.

Ordering plywood for Perth and Kinross: FAQs

What plywood should I use outside?

Use plywood with an exterior bond, class 3 under BS EN 636, or marine ply for very wet conditions.

Do you deliver plywood to trades and homeowners in Perth and Kinross?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is there a minimum order for delivery to Perth and Kinross?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many sheets of plywood do I need?

Divide the area by 2.98 m² (the area of an 8 × 4 sheet) and add about 10 percent for cutting.