Planed Timber & Mouldings delivery in Wallsend

Planed Timber & Mouldings available for Wallsend delivery

• Skirting boardsTorus, ogee, chamfered and square profiles in softwood and MDF.
• PAR softwoodSmooth timber in common finished sizes.
• Window boardsSills for internal window reveals.
• ArchitraveMatching profiles for door frames.

Before you order planed timber

Matching old profiles

Bring an offcut or a clear profile photo with measurements and we will look for the closest current profile.

Nominal versus finished size

Planing takes material off, so a timber sold as 'nominal' 2 × 4 finishes smaller. Always check finished sizes when you need an exact fit.

Getting planed timber onto your Wallsend site

Finished timber is protected and handled with care; tell us if it needs to go inside out of the weather. Wallsend is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

A quick quantity check

A 3.8 × 4 m room with one door has about 14.8 m of wall to skirt. With 10% for joints and offcuts that is 16.3 m, or 4 lengths of 4.2 m skirting, plus architrave for each side of the door.

Planed Timber & Mouldings in Wallsend: questions

Do you deliver planed timber to trades and homeowners in Wallsend?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is there a minimum order for delivery to Wallsend?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What does PAR mean?

Planed all round: the timber has been machined smooth on all four faces.

Can you match an old skirting profile?

We can look for the closest current profile. Exact matches for old or bespoke profiles may need machining to order.