Order PIR insulation boards for delivery in Tiverton

Which PIR insulation boards can you order in Tiverton?

• Foil tape and fixingsTo seal joints and fix boards.
• Flat roof boardsBoards for warm flat roof build-ups.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Thermal laminate boardsPIR bonded to plasterboard.

Planning the drop in Tiverton

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Tiverton is inside our standard mainland delivery area.

• On busy streets in Tiverton, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Sizing your order

Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Getting the right PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Tiverton

Is there a minimum order for delivery to Tiverton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Can you deliver PIR insulation boards to a site with restricted access in Tiverton?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.