PIR Insulation Boards delivered to Stanford-le-Hope

Which PIR insulation boards can you order in Stanford-le-Hope?

• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Foil tape and fixingsTo seal joints and fix boards.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.

A quick quantity check

Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Delivering PIR insulation boards in Stanford-le-Hope

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Stanford-le-Hope is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• With roughly 7h 49m of daylight in Stanford-le-Hope around the shortest day, morning deliveries leave more working light for the job.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Getting the right PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

PIR Insulation Boards in Stanford-le-Hope: questions

Do you deliver PIR insulation boards to Stanford-le-Hope?

Yes. We deliver across Stanford-le-Hope, including SS17, SS16, RM16, RM18. Stanford-le-Hope is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Can you deliver PIR insulation boards to a site with restricted access in Stanford-le-Hope?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.