PIR Insulation Boards delivered to Stafford

Our PIR insulation boards range for Stafford jobs

• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.
• Foil tape and fixingsTo seal joints and fix boards.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.

Quantities: a worked example

Insulating 12 m² of rafters, floor or wall takes 5 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Delivery to Stafford: what helps

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Stafford is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• If neighbours share the access, it helps to let them know a lorry is coming.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Before you order PIR insulation boards

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Stafford

Do you deliver PIR insulation boards to Stafford?

Yes. We deliver across Stafford, including ST16, ST18. Stafford is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Can you deliver PIR insulation boards to a site with restricted access in Stafford?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.