PIR Insulation Boards delivery in Rotherham

What PIR insulation boards can we deliver to Rotherham?

• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Foil tape and fixingsTo seal joints and fix boards.

Delivering PIR insulation boards in Rotherham

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Rotherham is inside our standard mainland delivery area.

• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• With roughly 7h 29m of daylight in Rotherham around the shortest day, morning deliveries leave more working light for the job.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

How much will you need?

Insulating 30 m² of rafters, floor or wall takes 12 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Picking the right product

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Rotherham

Do you deliver PIR insulation boards to trades and homeowners in Rotherham?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Is there a minimum order for delivery to Rotherham?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.