SK Trade, sktrade.co.uk

Insulation & Drylining

PIR Insulation Boards for Plymouth, delivered to site

PIR (polyisocyanurate) insulation boards are rigid foam boards with foil facings that give a lot of insulation for their thickness, used in floors, walls, pitched and flat roofs.

Need PIR insulation boards on site in Plymouth? Tell us what you are building and we will work out the quantities and price it delivered.

Foil-faced PIR insulation boards stacked beside rafters in a loft conversion

PIR Insulation Boards to Plymouth: the basics

Daylight
About 8h 01m on the shortest day
Delivering to
Plymouth, Devon
Nearby (straight line)
Paignton (26 mi), Newton Abbot (26 mi), St Austell (28 mi)
Postcode districts
PL2, PL4, PL1, PL3
Delivery
Standard mainland delivery
How it arrives
Wrapped packs

Choosing from our PIR insulation boards range

  • Cavity wall boardsBoards sized for partial-fill cavity insulation.
  • General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
  • Flat roof boardsBoards for warm flat roof build-ups.
  • Foil tape and fixingsTo seal joints and fix boards.
  • Thermal laminate boardsPIR bonded to plasterboard.

Before your Plymouth delivery arrives

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Plymouth is inside our standard mainland delivery area.

  • Give us the full postcode for the drop point; deliveries around PL2 are priced to the exact address.
  • In summer Plymouth gets around 16h 26m of daylight, but early deliveries still beat the traffic and give the longest working day.
  • Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

How much will you need?

Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Before you order PIR insulation boards

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

PIR Insulation Boards in Plymouth: questions

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

Is PIR better than mineral wool?

PIR insulates more per millimetre, so it suits tight spaces. Mineral wool is non-combustible, cheaper per square metre and better for sound.

Is there a minimum order for delivery to Plymouth?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can I add other materials to my Plymouth delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price