Order PIR insulation boards for delivery in Highbury

PIR Insulation Boards available for Highbury delivery

• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Foil tape and fixingsTo seal joints and fix boards.
• Flat roof boardsBoards for warm flat roof build-ups.
• Thermal laminate boardsPIR bonded to plasterboard.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.

Sizing your order

Insulating 30 m² of rafters, floor or wall takes 12 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Planning the drop in Highbury

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Highbury is inside our standard mainland delivery area.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Give us the full postcode for the drop point; deliveries around N5 are priced to the exact address.

Getting the right PIR insulation boards

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

PIR Insulation Boards in Highbury: questions

Do you deliver PIR insulation boards to Highbury?

Yes. We deliver across Highbury, including N5, N7, N1. Highbury is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Do you deliver PIR insulation boards to trades and homeowners in Highbury?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.