PIR Insulation Boards delivered to Failsworth

PIR Insulation Boards we supply in Failsworth

• Thermal laminate boardsPIR bonded to plasterboard.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Flat roof boardsBoards for warm flat roof build-ups.

PIR Insulation Boards: choosing well

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Estimating your PIR insulation boards

Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

How delivery works in Failsworth

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Failsworth is inside our standard mainland delivery area.

• If neighbours share the access, it helps to let them know a lorry is coming.
• Give us the full postcode for the drop point; deliveries around M35 are priced to the exact address.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Questions about PIR insulation boards delivery in Failsworth

Do you deliver PIR insulation boards to trades and homeowners in Failsworth?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is there a minimum order for delivery to Failsworth?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.