Insulation & Drylining
PIR Insulation Boards delivery in Didcot
PIR (polyisocyanurate) insulation boards are rigid foam boards with foil facings that give a lot of insulation for their thickness, used in floors, walls, pitched and flat roofs.
We deliver PIR insulation boards to sites, driveways and yards across Didcot, from a single pallet for a small job to full loads for bigger builds.

PIR Insulation Boards to Didcot: the basics
- Delivering to
- Didcot, Oxfordshire
- Daylight
- About 7h 48m on the shortest day
- Postcode districts
- OX11, OX14
- Nearby (straight line)
- Abingdon (5 mi), Oxford (10 mi), Thatcham (14 mi)
- How it arrives
- Wrapped packs
- Delivery
- Standard mainland delivery
PIR Insulation Boards available for Didcot delivery
- Flat roof boardsBoards for warm flat roof build-ups.
- General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
- Foil tape and fixingsTo seal joints and fix boards.
- Thermal laminate boardsPIR bonded to plasterboard.
Choosing PIR insulation boards
Fire considerations
PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.
Sealing joints
Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Working out quantities for your Didcot job
Insulating 12 m² of rafters, floor or wall takes 5 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator
Before your Didcot delivery arrives
Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Didcot is inside our standard mainland delivery area.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
PIR Insulation Boards in Didcot: questions
How thick should PIR insulation be?
It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.
Do you deliver PIR insulation boards to Didcot?
Yes. We deliver across Didcot, including OX11, OX14. Didcot is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Can I add other materials to my Didcot delivery?
Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.
Can PIR be used in external walls?
In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.
Close to Didcot
- PIR Insulation Boards in Abingdon
- PIR Insulation Boards in Oxford
- PIR Insulation Boards in Thatcham
- PIR Insulation Boards in Newbury
- PIR Insulation Boards in Reading
- PIR Insulation Boards in Witney
Other materials for Didcot sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
