PIR Insulation Boards delivered to Burgess Hill

Our PIR insulation boards range for Burgess Hill jobs

• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Flat roof boardsBoards for warm flat roof build-ups.
• Foil tape and fixingsTo seal joints and fix boards.

Before your Burgess Hill delivery arrives

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Burgess Hill is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

A quick quantity check

Insulating 36 m² of rafters, floor or wall takes 14 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Picking the right product

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

PIR Insulation Boards questions

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Can you deliver PIR insulation boards to a site with restricted access in Burgess Hill?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Burgess Hill?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.