Order PIR insulation boards for delivery in Boston

PIR Insulation Boards we supply in Boston

• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Foil tape and fixingsTo seal joints and fix boards.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.

Planning the drop in Boston

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Boston is inside our standard mainland delivery area.

• With roughly 7h 34m of daylight in Boston around the shortest day, morning deliveries leave more working light for the job.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Getting the right PIR insulation boards

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Estimating your PIR insulation boards

Insulating 24 m² of rafters, floor or wall takes 9 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Ordering PIR insulation boards for Boston: FAQs

Do you deliver PIR insulation boards to Boston?

Yes. We deliver across Boston, including PE21, PE22, PE20. Boston is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Do you deliver PIR insulation boards to trades and homeowners in Boston?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.