SK Trade, sktrade.co.uk

Insulation & Drylining

PIR Insulation Boards delivered to Barrow-in-Furness

PIR (polyisocyanurate) insulation boards are rigid foam boards with foil facings that give a lot of insulation for their thickness, used in floors, walls, pitched and flat roofs.

From LA14 to LA13, we price PIR insulation boards delivered to Barrow-in-Furness and confirm the drop point and date when you order.

Foil-faced PIR insulation boards stacked beside rafters in a loft conversion

Barrow-in-Furness delivery at a glance

Nearby (straight line)
Morecambe (15 mi), Fleetwood (16 mi), Lancaster (18 mi)
Postcode districts
LA14, LA13
How it arrives
Wrapped packs
Delivering to
Barrow-in-Furness, Cumbria
Delivery
Standard mainland delivery
Daylight
About 7h 21m on the shortest day

What PIR insulation boards can we deliver to Barrow-in-Furness?

  • Foil tape and fixingsTo seal joints and fix boards.
  • Thermal laminate boardsPIR bonded to plasterboard.
  • General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
  • Cavity wall boardsBoards sized for partial-fill cavity insulation.

Estimating your PIR insulation boards

Insulating 12 m² of rafters, floor or wall takes 5 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Things to check before you order

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How delivery works in Barrow-in-Furness

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Barrow-in-Furness is inside our standard mainland delivery area.

  • If the site is up a shared drive or behind other houses, tell us the distance from the road.
  • Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
  • Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Common questions from Barrow-in-Furness

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Can you deliver PIR insulation boards to a site with restricted access in Barrow-in-Furness?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver PIR insulation boards to Barrow-in-Furness?

Yes. We deliver across Barrow-in-Furness, including LA14, LA13. Barrow-in-Furness is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price