SK Trade, sktrade.co.uk

Insulation & Drylining

PIR Insulation Boards for Bangor (Gwynedd), delivered to site

PIR (polyisocyanurate) insulation boards are rigid foam boards with foil facings that give a lot of insulation for their thickness, used in floors, walls, pitched and flat roofs.

Building in Bangor (Gwynedd)? Send us your list and we will come back with a delivered price for the PIR insulation boards and anything else on it.

Foil-faced PIR insulation boards stacked beside rafters in a loft conversion

PIR Insulation Boards to Bangor (Gwynedd): the basics

Delivering to
Bangor (Gwynedd), Gwynedd
Daylight
About 7h 31m on the shortest day
Delivery
Standard mainland delivery
Postcode districts
LL57, LL59
How it arrives
Wrapped packs
Nearby (straight line)
Caernarfon (8 mi), Colwyn Bay (17 mi), Holyhead (21 mi)

PIR Insulation Boards available for Bangor (Gwynedd) delivery

  • Foil tape and fixingsTo seal joints and fix boards.
  • Cavity wall boardsBoards sized for partial-fill cavity insulation.
  • General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
  • Flat roof boardsBoards for warm flat roof build-ups.
  • Thermal laminate boardsPIR bonded to plasterboard.

Planning the drop in Bangor (Gwynedd)

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Bangor (Gwynedd) is inside our standard mainland delivery area.

  • Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
  • In summer Bangor (Gwynedd) gets around 16h 59m of daylight, but early deliveries still beat the traffic and give the longest working day.
  • With roughly 7h 31m of daylight in Bangor (Gwynedd) around the shortest day, morning deliveries leave more working light for the job.

Getting the right PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Wales has its own Approved Documents, including its own Part L for energy efficiency, and building control is handled by the local authority or a registered approver.

A quick quantity check

Insulating 30 m² of rafters, floor or wall takes 12 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Questions about PIR insulation boards delivery in Bangor (Gwynedd)

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

Do you deliver PIR insulation boards to Bangor (Gwynedd)?

Yes. We deliver across Bangor (Gwynedd), including LL57, LL59. Bangor (Gwynedd) is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Can you deliver PIR insulation boards to a site with restricted access in Bangor (Gwynedd)?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price