PIR Insulation Boards for Bangor (Down), delivered to site

Our PIR insulation boards range for Bangor (Down) jobs

• Foil tape and fixingsTo seal joints and fix boards.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.

Getting PIR insulation boards onto your Bangor (Down) site

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Deliveries to Northern Ireland include a sea crossing, so we quote each order individually.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Getting the right PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

In Northern Ireland building work follows the Building Regulations (Northern Ireland), with guidance in the Technical Booklets, and applications go to the council's building control team.

Working out quantities for your Bangor (Down) job

Insulating 24 m² of rafters, floor or wall takes 9 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Questions about PIR insulation boards delivery in Bangor (Down)

Is there a minimum order for delivery to Bangor (Down)?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Do you deliver PIR insulation boards to Bangor (Down)?

Yes. We deliver across Bangor (Down), including BT19, BT18. Deliveries to Northern Ireland include a sea crossing, so we quote each order individually. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.