OSB, MDF & Chipboard delivery in Warwick

What OSB, MDF and chipboard can we deliver to Warwick?

• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.

Before your Warwick delivery arrives

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Warwick is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Things to check before you order

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Estimating your OSB, MDF and chipboard

Decking 12 m² with 2440 × 1220 mm sheets takes 5 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 10 boards.

OSB, MDF & Chipboard in Warwick: questions

Can you deliver OSB, MDF and chipboard to a site with restricted access in Warwick?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.

Is there a minimum order for delivery to Warwick?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.