Order OSB, MDF and chipboard for delivery in Wallington

OSB, MDF & Chipboard available for Wallington delivery

• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• HardboardThin sheets for protection and backing.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.

Before your Wallington delivery arrives

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Wallington is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Choosing OSB, MDF and chipboard

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Working out quantities for your Wallington job

Decking 36 m² with 2440 × 1220 mm sheets takes 14 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 28 boards.

Questions about OSB, MDF and chipboard delivery in Wallington

Do you deliver OSB, MDF and chipboard to Wallington?

Yes. We deliver across Wallington, including SM6, SM5, CR4, SM2. Wallington is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Can OSB get wet?

OSB3 copes with humid conditions and short exposure during construction, but it should not be left in the rain for long or used where it stays wet.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.

Do you deliver OSB, MDF and chipboard to trades and homeowners in Wallington?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.