OSB, MDF & Chipboard for Tipton, delivered to site

Choosing from our OSB, MDF and chipboard range

• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• HardboardThin sheets for protection and backing.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.

Delivery to Tipton: what helps

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Tipton is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Picking the right product

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

How much will you need?

Decking 30 m² with 2440 × 1220 mm sheets takes 12 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 23 boards.

Your questions answered

Can you deliver OSB, MDF and chipboard to a site with restricted access in Tipton?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can I add other materials to my Tipton delivery?

Yes. Put everything on one list, from OSB, MDF and chipboard to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can OSB get wet?

OSB3 copes with humid conditions and short exposure during construction, but it should not be left in the rain for long or used where it stays wet.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.