OSB, MDF & Chipboard for Newcastle-under-Lyme, delivered to site

OSB, MDF & Chipboard available for Newcastle-under-Lyme delivery

• HardboardThin sheets for protection and backing.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.

How much will you need?

Decking 15 m² with 2440 × 1220 mm sheets takes 6 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 12 boards.

Picking the right product

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

How delivery works in Newcastle-under-Lyme

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Newcastle-under-Lyme is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• With roughly 7h 34m of daylight in Newcastle-under-Lyme around the shortest day, morning deliveries leave more working light for the job.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Ordering OSB, MDF and chipboard for Newcastle-under-Lyme: FAQs

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.

Can OSB get wet?

OSB3 copes with humid conditions and short exposure during construction, but it should not be left in the rain for long or used where it stays wet.

Is there a minimum order for delivery to Newcastle-under-Lyme?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver OSB, MDF and chipboard to a site with restricted access in Newcastle-under-Lyme?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.